Development of the Method for Calculation of Reinforced Concrete Structures on the Formation and Opening of Normal Cracks
https://doi.org/10.22227/2949-1622.2023.4.20-31
Abstract
This paper presents the history of the development of the method for calculating the crack resistance of reinforced concrete elements according to Soviet and modern design standards, which was based on the work of the Soviet and foreign scientists, such as: A.F. Loleit, V.I. Murashev, A.A. Gvozdev, S.A. Dmitriev, A. Clark, J. Monier and others. Also, the article discusses the currently updated calculation methods for the formation and opening of normal cracks according to domestic and foreign standards.
About the Authors
Nikolay N. Trekin
National Research Moscow State University of Civil Engineering "NRU MGSU"
Russian Federation
Russian Federation
Nikolay N. Trekin, Doctor of Technical Sciences, Professor
Yaroslavskoe Highway house 26, Moscow, 129337
Scopus: 6507199486, ResearcherID: AFY-8097-2022
Emil N. Kodysh
Joint Stock Company «Central Research and Design Experimental Institute (JSC Tsniipromzdanii)»
Russian Federation
Russian Federation
Emil N. Kodysh, Doctor of Technical Sciences, Professor
Dmitrovskoe sh., 46/2, Moscow, 127238
Scopus: 6506549600
Sergey G. Parfenov
Bryansk State Engineering and Technology University
Russian Federation
Russian Federation
Sergey G. Parfenov, Candidate of Technical Sciences, Professor
241037, Bryansk, Stanke Dimitrova Ave., 3
Scopus: 57205214215
Konstantin R. Andrian
Joint Stock Company «Central Research and Design Experimental Institute (JSC Tsniipromzdaniy)»
Russian Federation
Russian Federation
Konstantin R. Andrian, Engineer
Dmitrovskoe sh., 46/2, Moscow, 127238
References
1. Murashev V.I. Treshchinoustoychivost', zhestkost' i prochnost' zhelezobetona [Resistance to cracking, stiffness and strength of reinforced concrete]. – Moscow: Mashstroyizdat, 1950. 268 p.
2. NiTU 123-55 Normy i tekhnicheskiye usloviya proyektirovaniya betonnykh i zhelezobetonnykh kon-struktsiy [Standards on the design of concrete and reinforced concrete structures].
3. Gvozdev A.A., Dmitriev S.A. K voprosu o raschete secheniy po treshchinoobrazovaniyu [Calculation of cross sections for cracking]. Beton i zhelezobeton. 1960. No.7. Pp. 14-17.
4. SNiP II-V.1-62 Betonnyye i zhelezobetonnyye konstruktsii. Normy proyektirovaniya [Concrete and rein-forced concrete structures. Design Code].
5. SNiP II-21-75 Betonnyye i zhelezobetonnyye konstruktsii. Normy proyektirovaniya [Concrete and rein-forced concrete structures. Design Code].
6. SNiP 2.03.01-84* “Betonnyye i zhelezobetonnyye konstruktsii” [Concrete and reinforced concrete struc-tures]
7. Eurocode 2 Design of Concrete Structures. Part 1. General Rules and Rules for Buildings: EN 1992 –1:2001
8. SNiP 52-01-2003 “Betonnyye i zhelezobetonnyye konstruktsii. Osnovnyye polozheniya” [Concrete and reinforced concrete structures. General provisions].
9. SP 63.13330.2012 “Betonnyye i zhelezobetonnyye konstruktsii. Osnovnyye polozheniya” [Concrete and reinforced concrete structures. General provisions].
10. SP 63.13330.2018 “Betonnyye i zhelezobetonnyye konstruktsii. Osnovnyye polozheniya” [Concrete and reinforced concrete structures. General provisions].
11. CEB/FIB Model Code for Concrete Structures. -Lausanne: International Federation for Structural Con-crete (fib) Switzerland, 2013
12. DIN-1045-1-2008 Concrete, reinforced and prestressed concrete structures - Part 1: Design and construc-tion
13. Building Code Requirements for Structural Concrete (ACI 318-19) Commentary on Building Code Re-quirements for Structural Concrete (ACI 318R-19)
14. CP110 The Structural Use of Concrete: Part 1 Design, Materials & Workmanship. London: British Stand-ards Institution
15. BAEL-91 Règles techniques de conception et de calcul des ouvrages et constructions en béton armé sui-vant la méthode des états limites
16. Clark A. Cracking in reinforced concrete flexural members. ACI Journal. 1956. Proc. v. 52. Pp. 851-862
17. Ahmed A. Abu El Naas, Hany M. El Hashimy, Khaled F. El Kashif Comparative Analytical Study on Crack Width of Reinforced Concrete Structures. Civil Engineering Journal. 2021. Vol. 7. No. 07. July. Pp.1201-1221
18. Chowdhury S.H., Loo Y.C. A New Formula for Prediction of Crack Widths in Reinforced and Partially Prestressed Concrete. Advances in Structural Engineering. 2001. Vol. 4. No. 2. Pp. 100-110.
19. Trekin N.N., Kodysh E.N., Terekhov I.A. Improving the Regulatory Framework for the Standardization of Precast Concrete Structures. Reinforced concrete structures. 2023. 1(1). Pp. 64-71. (In Russ.)
Review
For citations:
Trekin N.N., Kodysh E.N., Parfenov S.G., Andrian K.R. Development of the Method for Calculation of Reinforced Concrete Structures on the Formation and Opening of Normal Cracks. Reinforced concrete structures. 2023;4(4):20-31. (In Russ.) https://doi.org/10.22227/2949-1622.2023.4.20-31
Views:
383
Email this article 