Integral Method for Determining the Stress State of an Anisotropic Reinforced Concrete Shell
https://doi.org/10.22227/2949-1622.2023.4.32-42
Abstract
The article deals with the issue of estimating the strength and stress-strain state of a reinforced concrete shell by the method of membrane theory and the theory of infinitesimal bending. A brief description of the methodology consists in the fact that the ground stress state of the shell is allocated to an independent problem, when, without introducing boundary effects, two of the four boundary conditions of the general moment theory are distinguished, which, together with the equations of the momentless theory, determine the ground stress state, and then boundary effects are superimposed. The equilibrium equations of the moment theory in forces and moments, geometric equations, components of tangential deformation and displacement, and the physical equations of state connecting them, expressing forces and moments through the components of deformation, are presented, since the characteristics of the stress-strain state of the shell depend not only on the variability of external influences and forces, but also on the length of the structure. The provisions laid down in the article shall be retained in the case of casings made of anisotropic material, provided that the presented elastic ratio is met. A system of equations of the generalized semi-membrane (semi-bending) state of an arbitrary shell of zero curvature, which determines the accuracy of this approach, is solved. The equations of the semi-torque theory for a circular cylindrical shell are presented, as well as describing the semi-membrane stress state of a long shell of zero curvature. The most important result of the study is the method of constructing integrals of the ground stress state of the shell based on the method of simple iterations, which expands the possibilities of the reliability theory, which makes it possible to build the foundations for the practical calculation of reinforced concrete shells according to the membrane theory and the theory of infinitesimal bending.
About the Author
Eugene M. Zveryaev
Peoples' Friendship University of Russia named after P. Lumumba
Russian Federation
Russian Federation
Eugene M. Zveryaev, Doctor of Technical Sciences, Professor, Professor of the Academy of Engineering
6, Miklouho-Maclay St., Moscow, 117198
Scopus: 57195225599, ResearcherID: IАR-2290-2023
References
1. Bondarenko V.M., Kolchunov V.I. Computational models of power resistance of reinforced concrete. Mos-cow,. 2004. 112 p. (in Russ.)
2. Tamrazyan A.G. Calculation of structural elements with a given normal distribution and reliability and bear-ing capacity. Bulletin of MGSU. 2012. No. 10. P.109-115. (in Russ.)
3. Tamrazyan A.G. On the stability of eccentrically compressed reinforced concrete elements with a small ec-centricity taking into account the rheological properties of concrete. Reinforced concrete structures. 2023. 2(2). Pp. 48-57. (in Russ.)
4. Zverjaev E.M., Berlinov M.V., Berlinova M.N. The integral method of definition of basic tension condition of anisotropic shel. International Journal of Applied Engineering Research. 2016. Т. 11, Pр.5811. (in Russ.)
5. Zveryaev E.M., Barinova M.N., Kim A.L. Evaluation of the concrete strength criterion by the example of analogy of theories of cylindrical shells and beams. Natural and technical Sciences. 2014. No. 9-10 (77). Pp. 358-360. (in Russ.)
6. Vlasov V.Z. Selected works, vol. 1. Moscow: Publishing House of the Academy of Sciences of the USSR, 1962.-578 p. (in Russ.)
7. Kolkunov N.V. Fundamentals of calculation of elastic shells. Moscow: Higher School, 1987. 256 p. (in Russ.).
8. Filin A.P. Elements of the theory of shells. Leningrad: Stroyizdat., 1987. 384 p. (in Russ.)
9. Tur V.I. Dome structures: shaping, calculation, design, efficiency improvement. Tutorial. Moscow: Publish-ing ASV, 2004. 96 p. (in Russ.).
10. Yakushev N.Z. Oscillations of the cylindrical shell of average thickness. III Collection of works of KSU. Ka-zan: 1965. Pр.173-180.
11. Hambardzumyan S.A. General theory of anisotropic shells. Moscow: Science, 1974.-446 p.
12. Vybornov V.G. Investigation of the stability of anisotropic shells of rotation with the help of complex equa-tions. III Collection of works of KSU. Kazan: 1965. –Рр.46-54.
13. Zhilin P.A. Applied Mechanics. Fundamentals of the theory of shells: Textbook. Allowance. Saint Peters-burg.: Publishimg of the Polytechn. univ. 2006. 167 p.
14. Firsanov, V.V., Doan Ch.N. Closed cylindrical shell under local load. Mechanics of composite materials and structures. 2011. Volume 17, No. 1. pp. 91-106.
15. Goldenweiser A.L. Theory of elastic thin shells. Moscow: Science, 1976.-512 p.
16. Vasiliev V.V. Mechanics of structures from composite materials. Moscow: Mechanical Engineering, 1988.-270 p.
17. Zveryaev E.M., Makarov G.I. Isolation of the equations of elementary stress states from the equations of shells of zero curvature. Construction mechanics of engineering structures and structures. 2012. No. 4. p. 6.
18. Zveryaev E.M. Saint-Venant-Picard-Banach method of integration of equations of elasticity theory of thin-walled systems. Journal of Applied Mathematics and Mechanics. 2019. T. 83. No 5–6. Pp. 823-833.
19. Zveryaev E.M., Tupikova E.M. Iterative methods for constructing the solution of equations of open shells. Construction mechanics of engineering structures and structures. 2021. T. 17. No. Pp. 588–607. http://doi.org/10.22363/1815-5235-2021-17-6-588-607
Review
For citations:
Zveryaev E.M. Integral Method for Determining the Stress State of an Anisotropic Reinforced Concrete Shell. Reinforced concrete structures. 2023;4(4):32-42. (In Russ.) https://doi.org/10.22227/2949-1622.2023.4.32-42
Views:
183
Email this article 