Study of the Strength and Deformability of the Bond of Reinforcement with Concrete in Concrete Bending Elements
https://doi.org/10.22227/2949-1622.2025.4.44-56
Abstract
Experimental data were obtained to study the influence of reinforcement geometric parameters on the stress-strain state of flexural reinforced concrete structures and to consider reinforcement profile parameters as a design parameter. The study resulted in the obtained data on the main physical, mechanical, and deformation properties of reinforced concrete beams, as well as the adhesion of reinforcement with various periodic profiles. These data can be applied in the design of reinforced concrete structures by selecting the periodic profile of the reinforcement.
About the Authors
A. A. Kvasnikov
A.A. Gvozdev Research Institute of Concrete and Reinforced Concrete (NIIZhB), JSC “Research Center “Construction”
Россия
Россия
Alexander A. Kvasnikov, Candidate of Technical Sciences, Head of the Scientific and Technical Support Center
6 5 Institutskaya st., Moscow, 109428
I. P. Savrasov
Moscow State Technical University of Civil Aviation (MSTU CA)
Россия
Россия
Ivan P. Savrasov, Candidate of Technical Sciences, Assistant to the Vice-Rector
20 Kronstadt Boulevard, Moscow, 125993
References
1. GOST 34028–2016. Interstate Standard. Reinforcing Rolled Products for Reinforced Concrete Structures. Specifications. Moscow, Standartinform, 2017; 41. (in Russian).
2. GOST 5781–82. Hot-rolled Steel for the Reinforcement of Reinforced Concrete Structures. Specifications. M.: Standards Publishing House, 2005; 10. (in Russian).
3. SP 63.13330.2018. Concrete and Reinforced Concrete Structures. Main Provisions. Moscow, Ministry of Construc-tion of Russia (Minstroy Rossii), 2018; 143. (in Russian).
4. GOST 10884–94. Thermomechanically Strengthened Reinforcing Steel for Reinforced Concrete Structures. Specifications. Moscow, IPK Publishing House of Standards, 1995; 14. (in Russian).
5. STO ASChM 7–93. Rolled Periodic Profile from Reinforcing Steel. Specifications. Moscow, Association Chernmetstandart, 1993; 18. (in Russian).
6. GOST R 52544–2006. Weldable Reinforcing Rolled Products of Periodic Profile of Classes A500C and B500C for the Reinforcement of Reinforced Concrete Structures. Specifications. Moscow, Standartinform, 2006; 19. (in Rus-sian).
7. Kvasnikov A.A. Joint Work of Reinforcement with Different Periodic Profiles and Concrete under Confined Transverse Deformations. Beton i Zhelezobeton (Concrete and Reinforced Concrete). 2009; 4:21-24. (in Russian).
8. Stakhov D.O. Review and Comparison of Methods for Investigating the Bond Characteristics of Reinforcement with Concrete. Molodoy Uchenyy (Young Scientist). 2021; 23(365):62-68. (in Russian).
9. Mirsayapov I.T., Minzianov R.I., Khorkov E.V., Vagizov M.R., Shulayeva D.A. Experimental Study of the Bond between Steel Deformed Reinforcement and Concrete. Reinforced Concrete and Masonry Structures: Present and Future : Collection of Abstracts of the International Scientific Conference Dedicated to the 50th Anniversary of the Department “Reinforced Concrete and Masonry Structures” and the 105th Anniversary of the Kazan School of Reinforced Concrete. Kazan, 2024; 73-74. (in Russian).
10. Savrasov I.P. Experimental Studies of the Mechanical Properties and Bond with Concrete of Reinforcement with a Strength Class of 500 N/mm2. Beton i Zhelezobeton (Concrete and Reinforced Concrete). 2009; 4:16-21. (in Rus-sian).
11. Semenyuk S.D., Sedlyar T.N. Methodology for Experimental Studies of the Bond between Reinforcement of Cres-cent-Shaped Profile and Lightweight Concretes. Architectural and Construction Complex: Problems, Prospects, Innovations : Collection of Articles of the International Scientific Conference Dedicated to the 50th Anniversary of Polotsk State University. 2018; 92-94. (in Russian).
12. Kvasnikov A., Semchenkov A., Meshkov V. Bond to concrete action of reinforcing bars with different defor-mation patterns. Structural concrete. 2009; 10(4):203-209.
13. Choi O.C., Lee W.S. Interfacial bond analysis of deformed bars to concrete. ACI structural journal. 2002; 99(6):750-756.
14. Soretz S. A comparison of beam tests and pull-out tests. Materials and Structures.1972; 28(5):261-264.
15. RILEM Recommendations for the Testing and Use of Constructions Materials. RILEM, 1994; 618.
Review
For citations:
Kvasnikov A.A., Savrasov I.P. Study of the Strength and Deformability of the Bond of Reinforcement with Concrete in Concrete Bending Elements. Reinforced concrete structures. 2025;12(4):44-56. (In Russ.) https://doi.org/10.22227/2949-1622.2025.4.44-56
Views:
11
JATS XML
Email this article 